ROHS Approved Polyester Wire Enamel (BAWA 235)
- BAWA 235.35 is THEIC modified Class 155 Polyester wire enamel.
- BAWA 235.35 has high processing speed, high cut through & heat shock as compared to standard wire enamels.
- BAWA 235.35 is suitable for Die & Felt applications.
- BAWA 235.35 specially developed wire enamel having wide curing range.
- BAWA 235.35 specially suitable for wire size 0.05-5.0 mm.
| PHYSICAL
PROPERTIES |
| Appearance |
Golden Colour Liquid |
Solid Content
1g/180°C/1h |
35 ± 1% |
| * Viscosity |
70 to 90 |
| Flash Point |
40°C |
| Compatibility with thinner |
1 : 1 |
* Viscosity by Ford Cup (B4) at 300C in
Sec.
| THERMAL
PROPERTIES |
| Heat Shock |
|
| 2d/180°C/ 30min |
OK |
| Cut Through |
|
| 340°C / 2min |
OK |
| ELECTRICAL
PROPERTIES |
| Break Down Voltage kV |
at RT |
8.5 |
|
 |
| MECHANICAL
PROPERTIES |
| Diameter of Bare wire |
1.0 mm |
| Build up of enamel |
0.070 mm |
| Elongation |
38% |
Flexibility
Mandrel Winding (20% pre stretch 1xd) |
OK |
| Jerk Test |
OK |
| Peel Test (nXd ) |
180-200 |
| Abrasion (Av) (Unidirectional) |
12.N |
| CHEMICAL
PROPERTIES |
| Solvent Resistance |
| Pencil Hardness |
| Initial |
3h |
| Std. Solvent |
2h |
| Tan
Delta |
| Bending Point °C (Solid Block) |
120-130 |
|
Please note that all above-mentioned values may be changed according to the machine.
| RECOMMENDED THINNER |
Thinner W/E |
| PACKING : |
BAWA 235.35
Thinner W/E |
210 Kg in mild steel drums.
21 Kg in mild steel drums. |
| SHELF LIFE |
One year from date of manufacturing if stored in sealed container. |
This information contained here is best to our knowledge. Company makes no
warranty of results and assurance, no obligations or liabilities for the use
of any products or process therin. This publication is not to be taken as a
license to operate under or recommendation to infringe upon any patents.
©
Harman Bawa Pvt. Ltd, New Delhi. All Rights Reserved (Terms
of Use)