ROHS ApprovedTHEIC Modified Polyesterimide Wire Enamels (BAWAMID 743)
- BAWAMID 743.36 is a class 180, THEIC modified plyesterimide wire enamel with temperature index 200.
- BAWAMID 743.36 provides improved flexibility & adherence to
copper.
- Enamelled wire coated with Bawamid 743.36 gives excellent resistance
to refrigerants hermetic motors.
- BAWAMID 743.36 is suitable for wire size 0.2-1.6 mm
- BAWAMID 743.36 can be used as base coat for manufacturing dual
coating wires with Polyamide-Imide.
| PHYSICAL
PROPERTIES |
| Appearance |
Clear Liquid |
| Solid Content |
36 ± 1% |
| 1g/1800C/1h |
|
| * Viscosity |
90-110 |
| Flash Point |
400C |
| Compatibility with thinner |
1 : 1 |
* Viscosity by Ford Cup (B4) at 300C in
Sec.
| THERMAL
PROPERTIES |
| Heat Shock |
|
| 2d/2000C/ 30min |
OK |
| Cut Through |
|
| 3400C / 2min |
OK |
| ELECTRICAL
PROPERTIES |
| Break Down Voltage kV |
at RT |
11.0 |
|
 |
| MECHANICAL
PROPERTIES |
| Diameter of Bare wire |
1.0 mm |
| Build up of enamel |
0.070 mm |
| Elongation |
36% |
Flexibility
Mandrel Winding (15% pre stretch 1xd) |
OK |
| Jerk Test |
OK |
| Peel Test (nXd ) |
130 - 150 |
| Abrasion (Av) (Unidirectional) |
14N |
| CHEMICAL
PROPERTIES |
| Solvent Resistance |
| Pencil Hardness |
| Initial |
3h |
| Std. Solvent |
2h |
| Tan
Delta |
| Bending Point 0C(Solid
Block) |
190-210 |
|
Please note that all above mentioned values may be changed according
to the machine.
| RECOMMENDED THINNER |
Thinner PW/E |
| PACKING : |
Bawa 743.36
Thinner PW/E |
210 Kg in mild steel drums.
21 Kg in mild steel drums. |
| SHELF LIFE |
One year from date of manufacturing if
stored in sealed container (at room temperature 25 0C). |
This information contained here is best to our knowledge. Company makes no
warranty of results and assurance, no obligations or liabilities for the use
of any products or process therin. This publication is not to be taken as a
license to operate under or recommendation to infringe upon any patents.
©
Harman Bawa Pvt. Ltd, New Delhi. All Rights Reserved (Terms
of Use)