ROHS Approved

Poly-Imide Wire Enamel (BAWATHERM 1001)

BAWATHERM 1001 is a Class 220 modified Poly-imide based wire enamel, wires coated with BAWATHERM 1001 has resistance to refrigerants R-12 / R-22.

It can be used as top coat or a Sole coat. It is a very good replacement of traditional polyamide-imide enamel and its cresol soluble and free from NMP so application made easy.

PHYSICAL PROPERTIES
SOLID CONTENT % (lg/1h/180⁰ C)	* VISCOSITY	PROPOSED WIRE RANGE (in mm)
27±1	300-500	Up to 0.8
34±1	1000-1500	0.8 - 1.6

* Viscosity by Viscometer / Brook Field at 23°C in Cps

Tan Delta
Bending Point ^oC(Solid Block)	215-225

Please note that all above mentioned values may be changed according to the machine.

RECOMMENDED THINNER		Thinner PW/E
PACKING :	Bawatherm 1001 Thinner PWE	210 Kg in mild steel 21 Kg in mild steel drums.
SHELF LIFE	One year from date of manufacturing if stored in sealed container (at room temperature 25 ⁰C).

MECHANICAL PROPERTIES
Diameter of Bare wire	.500
Build up of enamel	0.065 mm
Elongation	32%
Flexibility Mandrel Winding (15% pre stretch 1xd)	OK
Jerk Test	OK
Peel Test (nxd)	-
Abrasion (AV) (Unidirectional)	10.0

THERMAL PROPERTIES
Cut through	360⁰ C /2 min
Heat shock	2d/240⁰C/30min

ELECTRICAL PROPERTIES
Break Down Voltage kV	at RT	8.5 kv

CHEMICAL PROPERTIES
Solvent Resistance
Pencil Hardness
Initial	3h
Std. Solvent	2h

Yes! I am interested

This information contained here is best to our knowledge. Company makes no warranty of results and assurance, no obligations or liabilities for the use of any products or process therin. This publication is not to be taken as a license to operate under or recommendation to infringe upon any patents.

PRODUCT RANGE
Wire Enamels		Impregnating Resins	Insulating Varnishes